User Tools

Site Tools


projects:anycubic_i3_mega:g-codes:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

projects:anycubic_i3_mega:g-codes:start [2019/03/22 15:40] (current)
jpk created
Line 1: Line 1:
 +====== Default ======
 +<​code>​
 +G21 ;metric values
 +G90 ;absolute positioning
 +M82 ;set extruder to absolute mode
 +M107 ;start with the fan off
 +G28 X0 Y0 ;move X/Y to min endstops
 +G28 Z0 ;move Z to min endstops
 +G1 Z15.0 F{speed_travel} ;move the platform down 15mm
 +G92 E0 ;zero the extruded length
 +G1 F200 E3 ;extrude 3mm of feed stock
 +G92 E0 ;zero the extruded length again
 +G1 F{speed_travel}
 +M117 Printing...
 +G5
 +</​code>​
  
 +====== Modified: No Drop ======
 +<​code>​
 +G21 ;metric values
 +G90 ;absolute positioning
 +M82 ;set extruder to absolute mode
 +M107 ;start with the fan off
 +G28 X0 Y0 ;move X/Y to min endstops
 +G28 Z0 ;move Z to min endstops
 +G91
 +G1 X5.0 Y5.0 F7200
 +G Z0.1
 +G90
 +G5
 +</​code>​
projects/anycubic_i3_mega/g-codes/start.txt · Last modified: 2019/03/22 15:40 by jpk